WEH® Connector TW18P for testing of components with male thread, pneumatic actuation, vacuum up to max. 350 bar - Product family
Please find below a selection of available articles.
For further articles and designs, please refer to our data sheet or catalog.
WEH® Leak Test Quick Connector TW18P for vacuum and pressure testing up to max. 350 bar
The WEH® TW18P connector is the perfect tool for automated pressure, function and vacuum testing during production and rated for pressures up to max. 350 bar. The safe and pressure-tight connection to standardised male threads is established in just seconds – without tedious hand tightening.
No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The pneumatic actuation for external manual, semi or fully automatic control systems is effected via an external valve. On frequent connection and disconnection considerable time and cost savings are achieved thanks to automated processes.
The higher the test pressure, the tighter the WEH® Connector will clamp itself onto the test piece port thus providing added safety for operators.
The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For manual actuation the TW18H with hand lever is available and for pneumatic applications the TW18V with valve button is the right choice.
- Automation possible
- Increased productivity & Cost reductions
- Connection in seconds
- Ergonomic design
- High-grade materials
- No hand tightening required
- Testing devices are eliminated
- WEH® Jaw Locking Mechanism
Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:
- Tube fitting to ISO 8434-1 | M10x1.0 up to M22x1.5
- Whitworth tube thread to ISO 7/1 or DIN EN ISO 228-1 | G1/2" up to G3/4"
- NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1/2"
- SAE J512 (45° cone), SAE J513
- SAE J514 JIC 37° | UNF 7/16"-20 up to UNF 7/8"-14
The TW18P Connector is suitable for automated testing of engines / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems, automatic production test benchs and robotics.