WEH® Connector TW18H for testing of components with male thread, lever actuation, vacuum up to max. 350 bar - Product family

Please find below a selection of available articles.
For further articles and designs, please refer to our data sheet or catalog.

The WEH® TW18H connector is the perfect tool for pressure, function and vacuum testing during production and rated for pressures up to max. 350 bar. The safe and pressure-tight connection to standardised male threads is established in just seconds – without tedious hand tightening.

No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The manual actuation via hand lever is child's play. Only actuate the hand lever and place the TW18H loosely onto the test piece. On frequent connection and disconnection considerable time and cost savings are achieved.

The higher the test pressure, the tighter the WEH® Connector will clamp itself onto the test piece port thus providing added safety for operators.

The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For automated applications with pneumatic actuation we offer the TW18V with valve button and the TW18P for fully automatic control systems.

Max. allowable operating pressure PS
Vacuum up to 350 bar (5,000 psi)
Temperature range
+5 °C up to +80 °C
Leak rate
1 x 10-3 mbar x l/s
Actuation
H = manual actuation of the lever
Material
Corrosion resistant stainless steel, anodized aluminium
Sealing material
Front seal of NBR
Marketing Features
  • Automation possible
  • Connection in seconds
  • Ergonomic design
  • High-grade materials
  • No hand tightening required
  • Testing devices are eliminated
  • WEH® Jaw Locking Mechanism
Application

Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:

  • Tube fitting to ISO 8434-1 | M10x1.0 up to M22x1.5
  • Whitworth tube thread to ISO 7/1 or DIN EN ISO 228-1 | G1/2" up to G3/4"
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1/2"
  • SAE J512 (45° cone), SAE J513
  • SAE J514 JIC 37° | UNF 7/16"-20 up to UNF 7/8"-14

The TW18H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems.

Data sheets
/Files/Files/05-Data-Sheets/Quick-Connectors/tw18-data-sheet-en.pdf
Data sheet EN 502 KB
/Files/Files/05-Data-Sheets/Quick-Connectors/tw18-datenblatt-de.pdf
Data sheet DE 492 KB
/Files/Files/05-Data-Sheets/Quick-Connectors/tw18-ficha-tecnica-es.pdf
Data sheet ES 512 KB
/Files/Files/05-Data-Sheets/Quick-Connectors/tw18-fiche-technique-fr.pdf
Data sheet FR 511 KB
 
Send a message
We need to store and process your data in order to make the requested content available to you. You have the right to request transparency at any time regarding the type of data we process and are entitled to demand the deletion of your personal information. Please read our privacy policy for more information.
Contact our sales team
Phone
+49 7303 9609-0
Email