The WEH® TK17 H2 35 MPa ENR with exchangeable nozzle receiver was developed for refueling cars with compressed hydrogen (CGH2).
The fueling nozzle provides the same proven characteristics as the actual known TK17 H2 35 MPa.
Exchangeable data interface
The IR data interface which is located at the front part of the fueling nozzle ensures proper communication between the vehicle and the fueling station thus achieving the optimum filling level.
So far the complete fueling nozzle has had to be sent in for repair in case of damage or malfunction of the data interface. With this version of the TK17 H2 35 MPa, however, the data interface can now be easily exchanged by specially trained personnel on the spot and within a very short time. Downtimes are reduced.
Prevent fueling nozzles from freezing on the receptacle - WEH anti-freeze technology
The WEH® TK17 H2 35 MPa ENR is equipped with a purging line to allow for the hose to be flushed out with nitrogen during or after the fueling process. This can prevent ingress of moisture and formation of ice crystals when filling with pre-cooled hydrogen. Removing the fueling nozzle from the receptacle is thus facilitated even in unfavorable climatic conditions.
The accompanying mounting is also equipped with a connection for flushing cycles and enables flushing of the fueling nozzle when not in use.
Optimal safety for the operator
The continuous rubber protection offers optimal protection not only for the vehicle and the front part of the fueling nozzle against damage, impacts and weather-related influences, but also for the operator against frostbitten hands.
The internal coding for pressure range and gas type ensures that the WEH® TK17 H2 35 MPa ENR can be connected to the compatible WEH® Receptacles and also prevents the risk of confusion with natural gas.
Nominal bore (DN)
PN = 35 MPa | PS = 49 MPa
Media temperature range
-40 °C up to +85 °C
Ambient temperature range
-40 °C up to +85 °C
Type C acc. to SAE J2600:2015 and previous resp. ISO 17268:2012 and previous
With plastic thermal protection, cold protection, hand grip with magnet, exchangeable data interface acc. to SAE J2799 and integrated purging line
Approx. 2.4 kg (5.29 lbs.)
Medium for purging
Nominal bore (DN) of purging line
Media temperature range of purging medium
-20 °C up to +85 °C
Flow rate during purging
500 Nl/h at max. 12 bar purging pressure
Conformity / Tests / Approvals
Fueling nozzle: tests acc. to SAE J2600:2002 IR data interface: SAE J2799 and ATEX, NEC or KTL
Type C nozzle acc. to SAE J2600 resp. ISO 17268
Left or right single-handed operation
Compatible with the WEH® TN1 H₂ receptacle profile
Exchangeable nozzle receiver (ENR)
High flow rate -> short filling times
Hand grip with magnet
Integrated purging line for nitrogen purging
Plastic thermal protection
Prepared for dispenser mounting with purging system
Protection against impact and cold
WEH ® EASY-TURN swivel joint approx. 250°
WEH® Jaw Locking Mechanism
Fueling nozzle with data interface for H2 fast filling of electric / hybrid cars with fuell cells (FCV) at self-service fueling stations.