WEH® Fueling Nozzle TK17 H₂ 70 MPa ENR with exchangeable nozzle receiver - Product family

  • for fast filling of cars
  • self-service

The WEH® TK17 H2 70 MPa ENR with exchangeable nozzle receiver was developed for refueling cars with compressed hydrogen (CGH2).
The fueling nozzle provides the same proven characteristics as the actual known TK17 H2 70 MPa.

Exchangeable data interface
The IR data interface which is located at the front part of the fueling nozzle ensures proper communication between the vehicle and the fueling station thus achieving the optimum filling level.
So far the complete fueling nozzle has had to be sent in for repair in case of damage or malfunction of the data interface. With this version of the TK17 H2 70 MPa, however, the data interface can now be easily exchanged by specially trained personnel on the spot and within a very short time. Downtimes are reduced.

Prevent fueling nozzles from freezing on the receptacle - WEH anti-freeze technology
The WEH® TK17 H2 70 MPa ENR is equipped with a purging line to allow for the hose to be flushed out with nitrogen during or after the fueling process. This can prevent ingress of moisture and formation of ice crystals when filling with pre-cooled hydrogen. Removing the fueling nozzle from the receptacle is thus facilitated even in unfavorable climatic conditions.

The accompanying mounting is also equipped with a connection for flushing cycles and enables flushing of the fueling nozzle when not in use.

Optimal safety for the operator
The continuous rubber protection offers optimal protection not only for the vehicle and the front part of the fueling nozzle against damage, impacts and weather-related influences, but also for the operator against frostbitten hands.

The internal coding for pressure range and gas type ensures that the WEH® TK17 H2 70 MPa ENR can be connected to the compatible WEH® Receptacles and also prevents the risk of confusion with natural gas.

Nominal bore (DN)
4 mm
Pressure range
PN = 70 MPa | PS = 87.5 MPa
Temperature range
-40 °C up to +85 °C
Material
Corrosion resistant
Sealing material
Hydrogen compatible
Design
With plastic thermal protection, cold protection, hand grip with magnet,
exchangeable data interface acc. to SAE TIR J2799 and integrated purging line
Weight
Approx. 2.4 kg (5.29 lbs.)
Conformity / Tests / Approvals
Fueling nozzle: SAE TIR J2799, tests acc. to SAE J2600:2002
IR data interface: ATEX, NEC or KTL
Medium for purging
Nitrogen
Nominal bore (DN) of purging line
4 mm
Media temperature range of purging medium
-20 °C up to +85 °C
Flow rate during purging
500 Nl/h
Marketing Features
  • Coding for pressure range / gas type
  • Compatible to receptacle WEH® TN1 H2 70 MPa
  • Easy operation
  • Exchangeable nozzle receiver (ENR)
  • Extremely high flow rate -> short filling times
  • Hand grip with magnet
  • High-grade materials
  • Increased robustness
  • Integrated purging line for nitrogen purging
  • Left or right single-handed operation
  • Plastic thermal protection
  • Prepared for dispenser mounting with purging system
  • Protection against impact and cold
  • WEH® EASY-TURN swivel joint approx. 250°
  • WEH® Jaw Locking Mechanism
Application

Fueling nozzle for H2 fast filling of electric / hybrid cars with fuell cells (FCV) at self-service fueling stations.

Data sheets
/Files/Files/05-Data-Sheets/Hydrogen-Fueling-Components/Fueling-Nozzle/tk17-h2-70mpa-enr-data-sheet-en.pdf
Data sheet EN 366 KB
/Files/Files/05-Data-Sheets/Hydrogen-Fueling-Components/Fueling-Nozzle/tk17-h2-70mpa-enr-datenblatt-de.pdf
Data sheet DE 362 KB
 
Send a message
We need to store and process your data in order to make the requested content available to you. You have the right to request transparency at any time regarding the type of data we process and are entitled to demand the deletion of your personal information. Please read our privacy policy for more information.
Contact our sales team
Phone
+49 (0)7303 95190-0
Email