WEH® Check Valve TVR2 Gas, inert/flammable gases, max. 420 bar
C1-77200-X01
Check valve for use with inert gases and for mounting into gas mixing plants
The WEH® TVR2 gas check valves were developed specifically as non-return protection for the installation in systems, pipelines and extraction points for gaseous media.
They offer reliable protection against return gas flow and the formation of hazardous gas mixtures.
Check valves are used wherever a medium should flow in only one direction through a line and the reverse direction must be safely shut off.
The seals will not be damaged by the medium, as the valve seals are fitted outside the area of flow. The check valves therefore not only guarantee optimal sealing and minimal leakage, they also have a very long service life and are highly robust.
The minimal cracking pressure of the check valves ensures particularly low-noise operation even at high throughput rates.
The check valves comply with the European Pressure Equipment Directive PED 2014/68/EU and are also available complete with relevant seals for use with oxygen.
They offer reliable protection against return gas flow and the formation of hazardous gas mixtures.
Check valves are used wherever a medium should flow in only one direction through a line and the reverse direction must be safely shut off.
The seals will not be damaged by the medium, as the valve seals are fitted outside the area of flow. The check valves therefore not only guarantee optimal sealing and minimal leakage, they also have a very long service life and are highly robust.
The minimal cracking pressure of the check valves ensures particularly low-noise operation even at high throughput rates.
The check valves comply with the European Pressure Equipment Directive PED 2014/68/EU and are also available complete with relevant seals for use with oxygen.
Nominal bore (DN)
12 mm
Max. allowable operating pressure PS
420 bar (6,090 psi)
Cracking pressure PC
0.15 ± 0.05
Temperature range
+5 °C up to +95 °C
Medium
Inert/flammable gases
Housing material
Inert/flammable gases, Cone seal of PEEK / corrosion resistant steel
Sealing material
EPDM
Sealing concept
Inert/flammable gases: Cone seal of PEEK / corrosion resistant steel
Media inlet B1
UNF 1 3/8"-12* male thread, SAE J514
Media outlet B2
UNF 1 3/8"-12* male thread, SAE J514
Leak rate
5 x 10-3 mbar x l/s
Part no.
C1-77200-X01
Marketing Features
- High leak tightness
- Robust construction
- Simple installation
- Very low noise when in use due to the optimised internal gas flow
- Wear and corrosion resistant
Application
Check valve for use with inert gases and for mounting into gas mixing plants. Also suitable for vacuum applications.
CAD Files
Data sheets
Data sheet EN
258 KB
Data sheet DE
252 KB
Operating instructions
Operating instructions EN
1.2 MB
Betriebsanleitung DE
1.2 MB
Mode d'emploi FR
1.0 MB