Collets
Collets are used in baromax coning tool to tighten the tubing during processing.
Our collets and tools allow the application on tubing with up to 0.4 mm over- or undersize.
By exchanging the collet, the coning tool can be adapted to the processing of tubing with 1/4 '', 3/8 '' and 9/16 '' outer diameter.
Please note that the cutter has also be replaced depending on the outer diameter and orifice of the tubing.
Product variants:
- Pipe OD: 1/4" (6,35 mm)
- Pipe OD: 3/8" (9,52 mm)
- Pipe OD: 9/16" (14,3 mm)