WEH® Connector TW17H for testing of components with female thread, lever actuation, vacuum up to max. 350 bar - Product family

Please find below a selection of available articles.
For further articles and designs, please refer to our data sheet or catalog.

Connects to
Operating Pressure PS
Please select variant!

The WEH® TW17H connector is the perfect tool for pressure, function and vacuum testing during production and rated for pressure up to max. 350 bar. The safe and pressure-tight connection to standardised female threads is established in just seconds – without tedious hand tightening.

No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The manual actuation via hand lever is very easy. Only actuate the hand lever and place the TW17H loosely into the test piece. On frequent connection and disconnection considerable time and cost savings are achieved.

Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the connector for increased media flow and enhanced productivity.

The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For automated applications with pneumatic actuation we offer the TW17V with valve button and the TW17P for fully automatic control systems.

Special versions such as e.g. longer or shorter versions, plug versions or versions for hydraulic actuation etc. are also possible.

Max. allowable operating pressure PS
Vacuum up to 350 bar (5,000 psi)
Temperature range
+5 °C up to +80 °C
Leak rate
1 x 10-3 mbar x l/s
Actuation
H = manual actuation of the lever
Material
Corrosion resistant stainless steel, anodized aluminium
Sealing material
Front seal of SBR
Marketing Features
  • Automation possible
  • Connection in seconds
  • Ergonomic design
  • High-grade materials
  • No hand tightening required
  • Testing devices are eliminated
  • WEH® Jaw Locking Mechanism
Application

Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:

  • Metric ISO thread to DIN 13 | M10x1.0 up to M27x2.0
  • Whitworth tube thread to DIN EN ISO 228-1 | G1/8" up to G1"
  • BSPT (tapered Whitworth tube thread) | BSPT 1/8" up to BSPT 1"
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1"
  • SAE-O-Ring Boss | UNF 7/16"-20 up to UN 1 5/16"-12

The TW17H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components.
The WEH TW17H Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.

 

 
Send a message
We need to store and process your data in order to make the requested content available to you. You have the right to request transparency at any time regarding the type of data we process and are entitled to demand the deletion of your personal information. Please read our privacy policy for more information.
Contact our sales team
Phone
+49 7303 9609-0
Email