WEH® Válvula de cierre TV17GO
The WEH® TV17GO Shut-off valve for inert gases is used to shut off gases under high pressure. Due to its compact design, it is ideal for installation in technical gas plants. It can also be installed in existing systems without any problems.
Thanks to its streamlined design, the shut-off valve impresses with high flow values and its extremely low-noise operation.
The WEH® TV17GO is available with manual or pneumatic actuation (initial position NC or NO).
| Generación | 2 |
|---|---|
| Venteo automático | No |
| Válvula antrretorno integrada | No |
| Operación al vacío | Sí |
| Diámetro nominal (DN) | 12 mm |
| Presión de trabajo PS máx. Admisible | 420 bar |
| Presión de pilotaje | 6 hasta 8 bar |
| Conexión presión de pilotaje P1 | G1/4" rosca hembra |
| Rango de temperature | ' 0 °C hasta +60 °C |
| Ratio de fugas | ≤ 5 x 10-3 mbar x l/s |
| Accionamiento | Accionamiento neumático (NC resp. NO) para activaciones automáticas (como a través de SPS) |
| Material | Latón y Monel® 400 |
| Material del muelle | Acero 1.4310 |
| Material de sellado | EPDM |
| Measuring Port MA2 | M28x1,5 rosca macho |
| Number of cycles | Maximum 1 cycle per minute |
| Sello de la válvula de entrada | Modified polyimide |
| Dirección de flujo | B1 -> B2 |
Shut-off valve for filling, mixing, evacuating and discharging pipe systems or vessels of all types filled with inert gases at a pressure of up to 420 bar.
The shut-off valve is not designed for media of fluid group 1 as defined in the Pressure Equipment Directive 2014/64/EU or use in ATEX-relevant zones. Corresponding requirements can be evaluated by us on request.
| Descripción | Tipo de documento | Idioma | Formato de archivo | Tamaño del archivo |
|---|
