WEH® Receptacle TN1 H₂ (EC79)

With tube Ø 3/8
Part no.
C1-31316
€0.00

The WEH® TN1 H2 Receptacle is designed specifically for hydrogen refueling of fuel cell electric cars.

Due to the internal aerodynamic design the receptacle gives low noise (no high frequency whistle) combined with maximum flow rate and fast filling.

The receptacle is a very durable unit, minimizing maintenance and down-time.

The WEH® TN1 H2 Receptacle has an integrated check valve system which is designed to minimize the effect that dirt particles have on the sealing components within the receptacle. The TN1 H2 is also equipped with a coding for pressure range and gas type.

Technical Data
Nominal bore (DN)8 mm
Pressure rangePN = 35 MPa | PS = 45 MPa
Temperature range-40 °C up to +85 °C
DesignWith protection cap, with integrated particle filter (40 μm or 50 μm), integrated check valve and fittings (only for receptacles with tube fitting)
MaterialCorrosion resistant
Sealing MaterialHydrogen resistant
Conformity / Tests / Approvalse1 00 0008 (Regulation (EC) No. 79/2009)
Leak tests acc. to SAE J2600:2002
GB/T 26779-2021 (only applies to EC79 articles)
Also suitable for installation in forklifts, Coding for pressure range / gas type, Integrated high-flow check valve, Integrated self-cleaning particle filter (50 μm), Low-noise refueling, Sealing-friendly design

Receptacle for hydrogen refueling / filling of cars and fork-lift trucks or other industrial applications, to be used with WEH ® Fueling nozzles.

loading spinner
Description Document type Language File type File size