WEH® Pressure hose THP40-S1

With female thread NPT 1/4", 1m, oxygen
Part no.
C1-176389
€0.00

When filling gas cylinders with WEH® Connectors such as TW42, TW52, TW54, TW57, TW101, TW102 and TW152, the medium is often supplied to the connectors via hoses instead of pipes.

WEH® THP40 Hoses are made of Kevlar® reinforced PTFE and have a very high thermal degradation threshold and auto-ignition temperature due to their smooth bore finish. So even when the flow is at high pressure, there is only a low temperature rise. They are also resistant to a wide range of chemicals and solvents.

In addition, the pressure hoses offer excellent flexibility and bending tolerance, allowing the WEH ® Connector used to be quickly and easily connected to the gas cylinder. Vibrations are absorbed, which reduces noise and protects mounting points such as fittings.

The pressure hoses can be used for various demanding applications.

With the THP40 pressure hoses, WEH offers a complete product range: from the quick connector for connection to the gas cylinder to the hose for installation on the gas filling plant.

Technical Data
Nominal bore (DN)6.35 mm
Max. allowable operating pressure PS420 bar (6,090 psi)
Temperature range-30 °C up to +80 °C
MediumOxygen
Minimum bend radius90 mm
DesignComplete with fitting, bend protection (spiral) at the press-fittings and steel wire rope.
Pressure hoses for oxygen are additiionally equipped with a heat sink.
MaterialHose: Kevlar® reinforced PTFE
Fittings: brass
Sealing MaterialAcc. to gas type
Conformity / Tests / ApprovalsISO 14113:2013
Product seriesTHP40-S1
Bend protection (spiral) on both ends of the hose, Made of Kevlar® reinforced PTFE, Steel wire rope to secure in case of unintentional loosening of hose connections, Version for oxygen and inert gases such as nitrogen; argon; CO2; air; etc.
Pressure hose for connection of technical gas plants, such as gas filling plants, with WEH® Connectors.
loading spinner
Description Document type Language File type File size