WEH® Inline Breakaway Coupling TSA6 H₂
The WEH® TSA6 H2 Inline Breakaway Coupling which is installed inbetween the filling and venting hoses, is also available for bus and truck fueling stations.
In the event of accidental deployment, e.g. driving a vehicle from the dispenser with the nozzle remaining in the vehicle fuel port, the coupling will separate the connections between dispenser and hose sealing both ends. This protects largely the receptacle, the fueling nozzle and the dispenser against damage. The detached coupling can be easily reattached and placed back in service after having been function tested.
The WEH® Breakaway Coupling consists of a coupling body, a receptacle insert and a gas recirculation.
On request we also offer complete nozzle-hose-assemblies consisting of a fueling nozzle, a hose set and an inline breakaway coupling.
| Nominal bore (DN) | 12 mm |
|---|---|
| Max. allowable operating pressure PS | MAWP = 45 MPa according to ISO 19880-1 (PS = 450 bar) |
| Nominal pressure (PN) | 35 MPa |
| Media temperature range | -20 °C up to +85 °C |
| Ambient temperature range | -40 °C up to +85 °C |
| Media inlet B1 | UNF 7/8“-14 male thread, SAE J514, 37° cone |
| Design | With gas recirculation |
| Material | Corrosion resistant stainless steel, aluminium |
| Sealing Material | Hydrogen resistant |
| Breakaway force | 222 - 667 N |
- Eccentric actuation via an allen wrench
- Installation inbetween the filling and venting hoses
- Mounting flange
- Reusable without factory servicing
- Small compact design
Inline breakaway coupling for H2 bus and truck fueling stations for installation inbetween the filling and venting hoses.
| Description | Document type | Language | File type | File size |
|---|
