WEH® Fueling Nozzle TK20-S1 H₂ 70 MPa ENR
The WEH® TK20-S1 H2 70 MPa ENR Fueling nozzle with exchangeable data interface (ENR = exchangeable nozzle receiver) was developed for fast filling of cars with compressed, gaseous hydrogen (CGH2 ). Through to the larger nominal width, refueling in medium flow with 90 g/s or higher is possible. In addition, this filling coupling is designed for a maximum operating pressure of 96.25 MPa (= MAWP according to ISO 19880-1:2020).
In addition, the new TK20-S1 H2 70 MPa ENR has the same tried and tested features as the already well-known TK17 H2 70 MPa ENR. The fueling nozzle is additionally equipped with a purging line that allows purging with nitrogen during and after refueling process. This can prevent ingress of moisture and the formation of ice crystals during filling with precooled hydrogen.
The WEH® TK20-S1 H2 70 MPa ENR offers optimum safety for the operator thanks to the locking mechanism. The Fueling nozzle remains connected to the receptacle until the locking mechanism is released by the operator.
| Nominal bore (DN) | 5 mm |
|---|---|
| Max. allowable operating pressure PS | MAWP = 96.25 MPa according to ISO 17268 (PS = 962.5 bar) |
| Nominal pressure (PN) | 70 MPa |
| Media temperature range | -40 °C up to +85 °C |
| Ambient temperature range | -40 °C up to +85 °C |
| Design | With plastic thermal protection, cold protection, hand grip with magnet, exchangeable data interface acc. to SAE J2799 and integrated purging line |
| Material | Corrosion resistant |
| Sealing Material | Hydrogen resistant |
| Nozzle type | Type C acc. to SAE J2600:2015 and previous resp. ISO 17268:2020 and previous |
| Hydrogen flow rate | 90 g/s at 1.3 MPa pressure drop (F90-P1,3) Pressure drop values for 120 g/s on request |
| Weight | Approx. 2.65 kg |
| Medium for purging | Nitrogen |
| Nominal bore (DN) of purging line | 4 mm |
| Media temperature range of purging medium | -40 °C (preferably -20 °C) to +85 °C |
| Flow rate during purging | 500 Nl/h at max. 12 bar purging pressure |
| Conformity / Tests / Approvals | IR data interface: SAE J2799 and ATEX, NEC, KTL, CCC Design validation based on ISO 17268:2025 |
- Type C nozzle acc. to SAE J2600 resp. ISO 17268
- High flow rate
- Hand grip with magnet
- Plastic thermal protection
- Single-hand operation
- Easy operation
- Compatible with pressure stage H70 according to ISO 17268 (see table below)
- Exchangeable data interface (ENR)
- Integrated purging line for nitrogen flushing
- Prepared for dispenser mounting with purging system
- WEH® EASY-TURN swivel joint approx. 250°
- Protection against impact and cold
- Max. allowable operating pressure (MAWP according to ISO 19880-1:2020)
Fueling nozzle for hydrogen fast filling of cars at self-service fueling stations.
| Description | Document type | Language | File type | File size |
|---|
