WEH® Filter TSF2 H₂

With male and female thread UNF 9/16"-18
Part no.
C1-134710-X01
€0.00

Contaminants in the gas flow can enter the vehicle‘s storage tank during refueling. These dirt particles in the hydrogen fuel may cause damage to the sealing components. WEH, therefore, offers the WEH® TSF2 H2 Filter Series for clean hydrogen.Solid particles are captured reliably.

The filter element can be removed and is re-usable after having been cleaned.

The WEH® TSF2 H2 Filter is mainly used for fueling stations and dispensers.

In order to meet the different requirements of the dispenser manufacturers, WEH offers a wide variety of connection configurations - tube fitting / female thread on both ends or internal and male thread.

For use as a prefilter in the WEH® TSA2 H2 Inline Breakaway Coupling, WEH offers a special design with external and female thread.

Technical Data
Nominal bore (DN)8 mm
Pressure rangePN = 35 MPa | PS = 45 MPa
Temperature range-40 °C up to +85 °C
Media inlet B1UNF 9/16"-18 male thread, SAE J514, 37° cone
Filter element40 μm
DesignIncl. fittings (only for filters with tube fitting)
MaterialCorrosion resistant stainless steel
Sealing MaterialHydrogen resistant
Filter insert can be cleaned, For hydrogen free of impurities, Prefilter for inline breakaways

Filter for installation in hydrogen vehicles and fueling stations.

loading spinner
Description Document type Language File type File size