WEH® Connector TW18V

For UNF 7/16-20 male thread (SAE J514 JIC 37°), pneumatic actuation via valve button, max. 350 bar
Part no.
C1-49562
€0.00

WEH® Leak Test Quick Connector TW18V for vacuum and pressure testing up to max. 350 bar

The WEH® TW18V connector is the perfect tool for automated pressure, function and vacuum testing during production and rated for pressures up to max. 350 bar. The safe and pressure-tight connection to standardised male threads is established in just seconds – without tedious hand tightening.

No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The pneumatic actuation is very easy and requires only little effort. Simply press the valve button and place the connector loosely into the test piece. On frequent connection and disconnection considerable time and cost savings are achieved thanks to automated processes.

The higher the test pressure, the tighter the WEH® Connector will clamp itself onto the test piece port thus providing added safety for operators.

The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For manual actuation the TW18H with hand lever is available and for pneumatic applications the TW18P for fully automatic control systems is the right choice.

Technical Data
Max. allowable operating pressure PS350 bar (5,000 psi)
Pilot pressure6 - 12 bar ( 90 - 175 psi) compressed air
Temperature range+5 °C up to +80 °C
Connection AUNF 7/16"-20 male thread
Media inlet B1G1/2" female thread
Leak rate1 x 10-3 mbar x l/s
ActuationV = actuation via valve button
MaterialCorrosion resistant stainless steel, anodized aluminium
Sealing MaterialFront seal of NBR
Automation possible, Connection in seconds, Ergonomic design, High-grade materials, Increased productivity & Cost reductions, No hand tightening required, Testing devices are eliminated, WEH® Jaw Locking Mechanism

Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:

  • SAE J514 JIC 37° | UNF 7/16"-20 male thread

The TW18V Connector is suitable for automated testing of engines / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems, automatic production test benchs and robotics.

loading spinner
Description Document type Language File type File size