WEH® Connector TW17V
WEH® Leak Test Quick Connector TW17V for vacuum and pressure testing up to max. 350 bar
The WEH® TW17V connector is the perfect tool for pressure, function and vacuum testing during production and rated for pressure up to max. 350 bar. The safe and pressure-tight connection to standardised female threads is established in just seconds – without tedious hand tightening.
No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The pneumatic actuation is very easy and requires only little effort. Simply press the valve button and place the connector loosely into the test piece. On frequent connection and disconnection considerable time and cost savings are achieved thanks to the automation.
Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the connector for increased media flow and enhanced productivity.
The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For manual actuation we offer the TW17H with hand lever, for pneumatic applications the TW17P for fully automatic control systems is the right choice.
Special versions such as e.g. longer or shorter versions, plug versions or versions for hydraulic actuation etc. are also possible.
| Max. allowable operating pressure PS | 350 bar (5,000 psi) |
|---|---|
| Pilot pressure | 6 - 12 bar ( 90 - 175 psi) compressed air |
| Temperature range | +5 °C up to +80 °C |
| Connection A | G1/4" female thread |
| Media inlet B1 | G1/4" female thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | V = actuation via valve button |
| Material | Corrosion resistant stainless steel, anodized aluminium |
| Sealing Material | Front seal of NBR |
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:
- Whitworth tube thread to DIN EN ISO 228-1 | G1/4" female thread
The TW17V Connector is suitable for automated testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components and for automated testing systems, automatic production test benchs and robotics.
The WEH TW17V Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.
| Description | Document type | Language | File type | File size |
|---|
| Part no. | Product Name | |
|---|---|---|
 | C1-14812 | WEH® Connector TW17V for Whitworth tube thread DIN EN ISO 228-1, G1/4 female thread, pneumatic actuation via valve button, max. 50 bar |
| | C1-14813 | WEH® Connector TW17V for Whitworth tube thread DIN EN ISO 228-1, G1/4 female thread, pneumatic actuation via valve button, max. 350 bar |
| | C1-14840 | WEH® Connector TW17V for metric ISO female thread DIN 13 (DIN 3852), M16x1.5, pneumatic actuation via valve button, max. 50 bar |
| | C1-14841 | WEH® Connector TW17V for metric ISO female thread DIN 13 (DIN 3852), M16x1.5, pneumatic actuation via valve button, max. 350 bar |
| | C1-15732 | WEH® Connector TW17V for metric ISO female thread DIN 13 (DIN 3852), M10x1.0, pneumatic actuation via valve button, max. 50 bar |
| | C1-16199 | WEH® Connector TW17V for metric ISO female thread DIN 13 (DIN 3852), M10x1.0, pneumatic actuation via valve button, max. 350 bar |
