WEH® Connector TW17H
WEH® Leak Test Quick Connector TW17H for vacuum and pressure testing up to max. 350 bar
The WEH® TW17H connector is the perfect tool for pressure, function and vacuum testing during production and rated for pressure up to max. 350 bar. The safe and pressure-tight connection to standardised female threads is established in just seconds – without tedious hand tightening.
No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The manual actuation via hand lever is very easy. Only actuate the hand lever and place the TW17H loosely into the test piece. On frequent connection and disconnection considerable time and cost savings are achieved.
Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the connector for increased media flow and enhanced productivity.
The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For automated applications with pneumatic actuation we offer the TW17V with valve button and the TW17P for fully automatic control systems.
Special versions such as e.g. longer or shorter versions, plug versions or versions for hydraulic actuation etc. are also possible.
Max. allowable operating pressure PS | 50 bar (725 psi) |
---|---|
Temperature range | +5 °C up to +80 °C |
Connection A | M16x1.5 female thread |
Media inlet B1 | G3/8" female thread |
Leak rate | 1 x 10-3 mbar x l/s |
Actuation | H = manual actuation of the lever |
Material | Corrosion resistant stainless steel, anodized aluminium |
Sealing Material | Front seal of NBR |
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:
- Metric ISO thread to DIN 13 | M16x1.5 female thread
The TW17H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components.
The WEH TW17H Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.
Description | Document type | Language | File type | File size |
---|