WEH® Connector TW156
The WEH® TW156 can be connected to the manual inlet valve of the respiratory protective device without hand tightening. The clamping jaws grip onto the thread and the pressure-tight connection is made within seconds.
The test connector may either be mounted directly to the existing test unit or connected by a hose to the test unit. When used with a hose, the connector must be securely anchored when not in use.
The WEH® TW156 simplifies testing procedures and shortens test times and is available with manual or pneumatic actuation.
The quick connector WEH® TW156 is equipped with a NBR front seal. Other sealing materials are available on request. It is the customer‘s responsibility to clarify the media compatibility.
| Max. allowable operating pressure PS | 375 bar (5,440 psi) |
|---|---|
| Pilot pressure | 6 - 12 bar ( 90 - 175 psi) compressed air |
| Temperature range | +5 °C up to +80 °C |
| Medium | Breathing air (compressed air) |
| Connection A | Standard connection for G5/8“ male thread |
| Actuation | H = manual actuation of the leverV = actuation via pneumatic / manual finger pressure valve |
| Material | Corrosion resistant stainless steel Extensions: chromed / brass |
| Sealing Material | NBR |
- Easy connection means no straining of muscles; joints; etc.
- Improves operational safety and ergonomics
- Quick connection in seconds without hand tightening
- Robust construction
Quick connector for testing respiratory protective equipment.
| Description | Document type | Language | File type | File size |
|---|
