WEH® Connector TW130
The WEH® TW130 Quick Connector has been developed specially for testing components with banjo tube connections, hose and tube connections with sleeve nuts and similar configurations.
The compact design and ease of operation enables cost-effective testing, even for high quantities. Therefore, the WEH Test Connector is ideal for the automation of test procedures during production, automatic systems and robotics.
The connector is equipped with pneumatic valve actuation, a customer-tailored steel sample holder and if required a retaining plate.
The TW130 is rated for a pressure range up to max.350 bar. Automation is possible. Special versions, e.g. multi-connectors etc. are also available on request.
| Max. allowable operating pressure PS | 350 bar (5,000 psi) |
|---|---|
| Pilot pressure | 6 - 8 bar (90 - 120 psi) |
| Pilot pressure port P1 | G1/8" female thread |
| Temperature range | -10 °C up to +80 °C |
| Media inlet B1 | G1/4" female thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | Pneumatic actuation via valve button. Automation possible. |
| Material | Base unit: Corrosion resistant stainless steel, anodized aluminium |
| Sealing Material | Front seal of NBR |
Multi function connector for automated pressure testing / function testing on HVAC-R components / hydraulic components with banjo tube connections and hose / tube connections with sleeve nut.
- Heat exchangers
- High pressure hoses / hydraulic hoses
| Description | Document type | Language | File type | File size |
|---|
