WEH® Connector TW110
The WEH® TW110 filling connector is the perfect tool for filling and evacuating refrigerants in automotive climate control systems acc. to SAE J639. It can be connected to beads with an outer diameter of 13 mm.
Thanks to the innovative WEH® Jaw locking mechanism, the safe and pressure tight connection is established in just seconds. Tedious and joint-damaging hand tightening is eliminated, additional sealing tapes are not required.
The connection is established by comfortable actuation of the grip sleeve. The result is an enormous work facilitation - time and costs are saved.
The integrated and flow-optimized shut-off valve reduces loss of refrigerant to a minimum. Besides environmental protection, the operator is also protected against frost burns to the hands.
The connector is made of stainless steel and ideally suited for continued use.
| Max. allowable operating pressure PS | 35 bar (510 psi) |
|---|---|
| Temperature range | -10 °C up to +80 °C |
| Connection A | Ø 13 |
| Media inlet B1 | G1 1/4" female thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | Manual actuation via sliding sleeve |
| Design | With integrated shut-off valve |
| Material | Corrosion resistant stainless steel |
| Sealing Material | Front seal of HNBR |
Quick connector for filling and evacuating refrigerants in automotive air conditioning equipment Ø 13, acc. to SAE J639.
| Description | Document type | Language | File type | File size |
|---|
