WEH® Connector TW05
The WEH® TW05 quick connector is the ideal tool for function, pressure and leak testing. Pneumatic components with female thread can thus be tested faster than ever before during series production.
Safe and pressure-tight connections to female threads of the most diverse connection standards can be established in just seconds - without tedious hand tightening.
Connecting and pressurising the test piece with 5 - 12 bar is accomplished in one operation. By simple actuation of the sliding sleeve, the patented WEH® clamping jaws spread apart and grip into the threaded test piece port.Additional sealants are not required. Complex and expensive clamping and testing devices are eliminated.
For automated testing procedures (frequent connections), the TW05 is also available with control housing instead of the sliding sleeve. With this version, actuation is carried out via external control and pressure lines. Thanks to the automated testing procedures, considerable time and cost savings are achieved.
The quick connector pays off within shortest time: Testing times are reduced, workflows improved and productivity is enhanced.
| Min. operating pressure | 5 bar |
|---|---|
| Max. allowable operating pressure PS | 12 bar |
| Temperature range | +5 °C up to +80 °C |
| Connection A | NPT 1/2" female thread |
| Media inlet B1 | G1/2" female thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | Manual actuation via grip sleeve |
| Material | Clamping jaws: Corrosion-resistant stainless steel Outer parts: Anodized aluminium |
| Sealing Material | Front seal of NBR |
Quick coupler for pressure testing / function testing / leak testing with compressed air of pneumatic components with female threads for the following standard sizes:
- NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/2" female thread
The TW05 Connector is suitable for testing pneumatic cylinders / mini-cylinders, pneumatic valves, fixtures, air engine, pivot drives, radiators and pneumatic tools. In combination with a control housing it is the ideal tool for automated leak tests. In combination with a control housing it is the ideal tool for automated leak tests.
| Description | Document type | Language | File type | File size |
|---|
| Part no. | Product Name | |
|---|---|---|
 | C1-10073 | WEH® Connector TW05, for leak testing, G1/4 female thread (Whitworth tube thread, DIN EN ISO 228-1), grip sleeve actuation, 5 - 12 bar |
| | C1-10088 | WEH® Connector TW05, for leak testing, G1/2 female thread (Whitworth tube thread, DIN EN ISO 228-1), grip sleeve actuation, 5 - 12 bar |
 | C1-10113 | WEH® Connector TW05, for leak testing, NPT 1/8 female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 5 - 12 bar |
| | C1-10117 | WEH® Connector TW05, for leak testing, G1/8 female thread (Whitworth tube thread, DIN EN ISO 228-1), grip sleeve actuation, 5 - 12 bar |
| | C1-10174 | WEH® Connector TW05, for leak testing, G1/8 female thread (Whitworth tube thread, DIN EN ISO 228-1), grip sleeve actuation, 5 - 12 bar |
| | C1-10402 | WEH® Connector TW05, for leak testing, NPT 1/4 female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 5 - 12 bar |
| | C1-11254 | WEH® Connector TW05, for leak testing, NPT 3/8 female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 5 - 12 bar |
| | C1-11255 | WEH® Connector TW05, for leak testing, NPT 1/2 female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 5 - 12 bar |
