WEH® Connector TW05

For leak testing, NPT 1/8 female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 5 - 12 bar
Part no.
C1-10113
€0.00

The WEH® TW05 quick connector is the ideal tool for function, pressure and leak testing. Pneumatic components with female thread can thus be tested faster than ever before during series production.

Safe and pressure-tight connections to female threads of the most diverse connection standards can be established in just seconds - without tedious hand tightening.

Connecting and pressurising the test piece with 5 - 12 bar is accomplished in one operation. By simple actuation of the sliding sleeve, the patented WEH® clamping jaws spread apart and grip into the threaded test piece port.Additional sealants are not required. Complex and expensive clamping and testing devices are eliminated.

For automated testing procedures (frequent connections), the TW05 is also available with control housing instead of the sliding sleeve. With this version, actuation is carried out via external control and pressure lines. Thanks to the automated testing procedures, considerable time and cost savings are achieved.

The quick connector pays off within shortest time: Testing times are reduced, workflows improved and productivity is enhanced.

Technical Data
Min. operating pressure5 bar
Max. allowable operating pressure PS12 bar
Temperature range+5 °C up to +80 °C
Connection ANPT 1/8" female thread
Media inlet B1G1/4" female thread
Leak rate1 x 10-3 mbar x l/s
ActuationManual actuation via grip sleeve
MaterialClamping jaws: Corrosion-resistant stainless steel
Outer parts: Anodized aluminium
Sealing MaterialFront seal of NBR
Automation possible, Compact design, Connection in seconds, Ergonomic design, High-grade materials, Increased productivity & Cost reductions, No hand tightening required, Simple seal replacement, WEH® Jaw Locking Mechanism

Quick coupler for pressure testing / function testing / leak testing with compressed air of pneumatic components with female threads for the following standard sizes:

  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" female thread

The TW05 Connector is suitable for testing pneumatic cylinders / mini-cylinders, pneumatic valves, fixtures, air engine, pivot drives, radiators and pneumatic tools. In combination with a control housing it is the ideal tool for automated leak tests. In combination with a control housing it is the ideal tool for automated leak tests.

loading spinner
Description Document type Language File type File size