WEH® Connector TW02

For straight tubes, tube OD 15.0 - 17.0 mm, pneumatic actuation, vacuum up to max. 35 bar
Part no.
C1-141958
€0.00

WEH® Leak Test Connector TW02 for automated vacuum and pressure testing up to max. 35 bar

The WEH® TW02 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals external tubes and externally threaded components, and can also be used for flushing and filling.

The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.

Only plug the connector onto the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.

The elastic front seal compresses onto the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.

Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request.

Technical Data
Max. allowable operating pressure PSVacuum up to 35 bar (510 psi)
Pilot pressure6 - 12 bar compressed air
Temperature range+5 °C up to +80 °C
Connection ATube OD 15.0 - 17.0 mm
Media inlet B1G1/4" female thread
Leak rate1 x 10-3 mbar x l/s
ActuationPneumatic actuation
MaterialHousing, piston and seal housing: Aluminium
Sealing MaterialMain seal chloroprene / o-rings NBR
For body size 001 main seal and o-rings are NBR.
Urethane seals for high-wear applications are optional, e.g. for threaded applications.
Automation possible, Connection in seconds, Ergonomic design, High-grade materials, Increased productivity & Cost reductions, No hand tightening required, Sealing irregular or rough surfaces, Simple seal replacement

Quick coupler for pressure testing / vacuum testing of straight tubes (sealing range external tube Ø 15.0 - 17.0 mm). Other applications are:

  • Automated leak tests
  • Threaded connections with pressure converter
  • Leak testing benches
  • Helium testing
  • Pick & place applications in automation technique / automated systems
  • Leakage tests in electric mobility
  • Robotics
loading spinner
Description Document type Language File type File size