WEH® Connector TW01

For leak testing of straight tubes, tube ID 62.1 - 65.6 mm, pneumatic actuation, vacuum up to max. 9 bar
Part no.
C1-141200
€0.00

WEH® Leak Test Connector TW01 for automated vacuum and pressure testing up to max. 9 bar

The WEH® TW01 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals bores, internal tubes and internally threaded components, and can also be used for flushing and filling.

The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.

Only plug the connector into the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.

As a standard the WEH® TW01 quick coupler is equipped with a stroke limitation and with an additional front seal for connection to female threads. The elastic front seal compresses into the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.

Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request. Shaft extensions or shortenings for TW01 Connectors complement the product family.

Technical Data
Max. allowable operating pressure PSVacuum up to 9 bar (130 psi)
Pilot pressureBody size 1 - 8: 6 - 12 bar compressed air
Pilot pressure port P1G1/8" female thread
Temperature range+5 °C up to +80 °C
Connection ATube ID 62.1 - 65.6 mm
Media inlet B1G3/4" female thread
Leak rate1 x 10-3 mbar x l/s
ActuationPneumatic actuation
MaterialHousing, piston and spacer: Aluminium
Sealing MaterialMain seal chloroprene / o-rings NBR
Urethane seals for high-wear applications are optional
Automation possible, Connection in seconds, Ergonomic design, High-grade materials, Increased productivity & Cost reductions, No hand tightening required, Sealing irregular or rough surfaces, Simple seal replacement, Stroke limiter

Quick coupler for pressure testing / vacuum testing / pressure decay testing / helium testing / leak testing / filling / flushing / underwater testing of straight tubes, bores and components with female thread for the following standard sizes:

  • Straight tube | Sealing range internal tube Ø 62.1 mm up to 65.6 mm

The TW01 Connector is suitable for automated leak testing of vessels, valves, plastic vessels, pumps, medical components, filter, pressure vessels, tube connections and rubber hoses.Other applications are:

  • Leck test benches
  • Pick & place applications in automation technique / automated systems

The quick connector is also used in e-mobility for leak tests of inverters (direct current to alternating current), cooling circuits of electric motors and hybrid motors as well as aluminium boxes with lithium-ion batteries.

loading spinner
Description Document type Language File type File size