WEH® Connector TW01
For leak testing of straight tubes, tube ID 8.4 - 10.0 mm, pneumatic actuation, vacuum up to max. 9 bar
Part no.
C1-141179
€0.00
WEH® Leak Test Connector TW01 for automated vacuum and pressure testing up to max. 9 bar
The WEH® TW01 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals bores, internal tubes and internally threaded components, and can also be used for flushing and filling.
The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.
Only plug the connector into the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.
As a standard the WEH® TW01 quick coupler is equipped with a stroke limitation and with an additional front seal for connection to female threads. The elastic front seal compresses into the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.
Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request. Shaft extensions or shortenings for TW01 Connectors complement the product family.
| Max. allowable operating pressure PS | Vacuum up to 9 bar (130 psi) |
|---|---|
| Pilot pressure | Body size 01: 6 - 9 bar compressed air |
| Pilot pressure port P1 | M5 |
| Temperature range | +5 °C up to +80 °C |
| Connection A | Tube ID 8.4 - 10.0 mm |
| Media inlet B1 | M5 |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | Pneumatic actuation |
| Material | Housing, piston and spacer: Aluminium |
| Sealing Material | Main seal chloroprene / o-rings NBR Urethane seals for high-wear applications are optional |
Automation possible, Connection in seconds, Ergonomic design, High-grade materials, Increased productivity & Cost reductions, No hand tightening required, Sealing irregular or rough surfaces, Simple seal replacement, Stroke limiter
Quick coupler for pressure testing / vacuum testing / pressure decay testing / helium testing / leak testing / filling / flushing / underwater testing of straight tubes, bores and components with female thread for the following standard sizes:
- Straight tube | Sealing range internal tube Ø 8.4 mm up to 10.0 mm
The TW01 Connector is suitable for automated leak testing of vessels, valves, plastic vessels, pumps, medical components, filter, pressure vessels, tube connections and rubber hoses.Other applications are:
- Leck test benches
- Pick & place applications in automation technique / automated systems
The quick connector is also used in e-mobility for leak tests of inverters (direct current to alternating current), cooling circuits of electric motors and hybrid motors as well as aluminium boxes with lithium-ion batteries.
| Description | Document type | Language | File type | File size |
|---|
Product variants
| Part no. | Product Name | |
|---|---|---|
 | C1-139903 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 7.7 - 8.3 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141179 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 8.4 - 10.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141180 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 10.0 - 12.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141181 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 12.0 - 14.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141182 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 14.0 - 16.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141183 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 16.0 - 18.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141184 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 18.0 - 20.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141185 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 20.0 - 22.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141186 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 22.0 - 24.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141187 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 24.0 - 26.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141188 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 26.0 - 28.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141189 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 28.0 - 30.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141190 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 30.0 - 32.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141191 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 32.0 - 34.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
 | C1-141192 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 34.0 - 37.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141193 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 37.0 - 40.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141194 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 40.0 - 43.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141195 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 43.0 - 47.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141196 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 47.0 - 51.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141197 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 51.0 - 55.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141198 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 55.0 - 58.5 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141199 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 58.5 - 62.1 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141200 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 62.1 - 65.6 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141201 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 65.6 - 69.2 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141202 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 69.2 - 72.7 mm, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141203 | WEH® Connector TW01 for leak testing of straight tubes, tube ID 72.7 - 76.0 mm, pneumatic actuation, vacuum up to max. 9 bar |
 | C1-141430 | WEH® Connector TW01 for leak testing, NPT 1/8" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141433 | WEH® Connector TW01 for leak testing, NPT 1/4" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141434 | WEH® Connector TW01 for leak testing, NPT 3/8" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141435 | WEH® Connector TW01 for leak testing, NPT 1/2" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141436 | WEH® Connector TW01 for leak testing, NPT 3/4" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141437 | WEH® Connector TW01 for leak testing, NPT 1" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141438 | WEH® Connector TW01 for leak testing, NPT 1 1/4" female thread, pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141439 | WEH® Connector TW01 for leak testing, NPT 1 1/2" female thread, pneumatic actuation, vacuum up to max. 9 bar |
 | C1-141459 | WEH® Connector TW01 for leak testing, M10x1.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141460 | WEH® Connector TW01 for leak testing, M12x1.5 internal thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141461 | WEH® Connector TW01 for leak testing, M14x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141462 | WEH® Connector TW01 for leak testing, M16x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141463 | WEH® Connector TW01 for leak testing, M18x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141464 | WEH® Connector TW01 for leak testing, M20x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
 | C1-141465 | WEH® Connector TW01 for leak testing, M22x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141466 | WEH® Connector TW01 for leak testing, M24x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141467 | WEH® Connector TW01 for leak testing, M26x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141468 | WEH® Connector TW01 for leak testing, M27x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141469 | WEH® Connector TW01 for leak testing, M28x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141470 | WEH® Connector TW01 for leak testing, M30x1.5 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141471 | WEH® Connector TW01 for leak testing, M33x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141472 | WEH® Connector TW01 for leak testing, M36x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141473 | WEH® Connector TW01 for leak testing, M42x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141474 | WEH® Connector TW01 for leak testing, M48x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141475 | WEH® Connector TW01 for leak testing, M60x2.0 female thread (Metric ISO-thread, DIN 13), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141901 | WEH® Connector TW01 for leak testing, UNF 7/16"-20 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141902 | WEH® Connector TW01 for leak testing, UNF 1/2"-20 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141903 | WEH® Connector TW01 for leak testing, UNF 9/16"-18 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141904 | WEH® Connector TW01 for leak testing, UNF 3/4"-16 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141905 | WEH® Connector TW01 for leak testing, UNF 7/8"-14 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141906 | WEH® Connector TW01 for leak testing, UN 1 1/16"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141907 | WEH® Connector TW01 for leak testing, UN 1 3/16"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141908 | WEH® Connector TW01 for leak testing, UN 1 5/16"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141909 | WEH® Connector TW01 for leak testing, UN 1 5/8"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141910 | WEH® Connector TW01 for leak testing, UN 1 7/8"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
| | C1-141911 | WEH® Connector TW01 for leak testing, UN 2 1/2"-12 female thread (SAE O-Ring Boss), pneumatic actuation, vacuum up to max. 9 bar |
