WEH® Adaptor Nozzle TK4 CNG
The NGV1 standard is not yet in use in filling stations and vehicles in all countries.
To allow refueling between the NGV1 standard and other country-specific standards, WEH offers a range of adaptor nozzles.
To refuel NGV1 / ISO 14469 vehicles at filling stations with the Italian standard, WEH has developed the TK4 CNG adaptor nozzle.
Operating the nozzle is quite simple. The adaptor nozzle is simply positioned straight and pushed onto the receptacle. The clamping jaws of the TK4 CNG firmly clamp the receptacle. When the nozzle is connected, the integrated shut-off valve opens – the pressure-tight connection is established.
Unlike the frequently used ball coupling, the clamping jaws of the TK4 CNG leave no marks on the receptacle.
Thanks to the elongated design of the adaptor nozzle, even receptacles that are difficult to reach can easily be refuelled.
| Nominal bore (DN) | 8 mm |
|---|---|
| Pressure range | P30 acc. to ANSI NGV1 / B200 acc. to ISO 14469 PN = 200 bar (3,000 psi) | PS = 300 bar |
| Temperature range | -40 °C up to +85 °C |
| Media inlet B1 | G1/2“ male thread (Italian standard) |
| Design | With plastic thermal protection |
| Material | Corrosion resistant |
| Sealing Material | Natural gas resistant |
Adaptor nozzle for CNG fast filling of cars with NGV1 / ISO 14469 receptacle profile with fueling nozzles acc. to Italian standard. Operation only by specially trained service personnel. Not for self-service operation!
| Description | Document type | Language | File type | File size |
|---|
