baromax fitting with straight connection

Pressure PS 2,500 bar, M30x2, DN 8
Part no.
C1-185506
€0.00

baromax fittings from WEH® are specially designed for connecting tube components in high pressure systems of 2,500 bar to 10,000 bar. The fittings are available for all common tube diameters in high pressure systems and can be delivered with metric or imperial connection threads.

The pressure-tight connection is established because the outer cone on the tube ends has a smaller angle than the inner cone of the fittings. This causes the metal contact surfaces to become deformed in the plastic area, which guarantees leak-free connection even under the highest pressure loads.

For the pressure ranges 2,500 bar and 4,200 bar, the fitting is manufactured using the common global standard of a 58° outer cone in a 60° inner cone.

For the pressure ranges 7,000 bar and 10,000 bar, we developed a special fitting with 116° and 120° and offer these exclusively. This achieves a considerably enhanced sealing effect.

To attach the outer cone on the tube ends and for reworking or repair of the inner cone, WEH® offers all the necessary tools.

Technical Data
Nominal bore (DN)8 mm
Pressure Range (PS)2,500 bar
Temperature range+5 °C up to +50 °C
MediumAir, Water, Hydraulic oil (exclusively non-hazardous oils pursuant to fluid group 2 DGR)
MaterialHigh-strength stainless steel
Product seriesFT-F2-S1
Easy conversion/replacement thanks to identical size of cross; T and angle piece, Optimized flow rate; as nominal width of fittings is higher than that of tubes, Pressure-resistant up to 10000 bar, Special sealing contour for leak-free connection

baromax fittings from WEH® are designed as a standard for hydraulic high pressure systems. Typical applications include hydraulic systems in hydroforming and water jet plants, high-pressure test stands, isostatic pressure for manufacturing ceramics as well as high-pressure applications in chemistry and food processing.

loading spinner
Description Document type Language File type File size